 |
|
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
STATNAMIC Advantages
- STATNAMIC applies loads up to 30 MN (3,400 tons).
- Foundations tested include high capacity drilled shafts, steel piles, augercast piles, timber piles, batter piles in clay, rock, silt, and sand.
- STATNAMIC can test bridge foundations, pile groups, spread footings, and off-shore piles.
- STATNAMIC can test the lateral capacity of foundations.
- Production piles can be tested without prior planning. No reaction piles are required.
- Three 600 ton tests can be conducted in a one day shift.
- Several STATNAMIC tests can be conducted for the cost of a single static test.
- STATNAMIC loads the pile and soil together.
- The duration of loading is on the order of 10 Hz.
- STATNAMIC 's built-in load cell and laser sensor provide direct measurements of load-displacement behaviour.
- STATNAMIC produces load-displacement results immediately on site.
HOME
| About Berminghammer | News
| Distributors | Contact
Us
Hydraulic Drills | Impact
Hammers | Leads | Statnamic
| Research & Development
Copyright (c) 2001 Berminghammer Foundation Equipment. All rights reserved.